Started building up a solid model of the interface box for the Fast GVT. Discovered that the display on the laser probe controller can detach and be panel mounted, while the actual controller can be mounted on a Din rail. I had Brad review my initial ideas and he suggested I make it more "idiot proof" and have both connectors from the accel and laser right next to each other so its hard to screw up. He also wants some way to group the pairs of cable that come off the accel/laser inertial sensor.
I also talked to Paul about it. He mentioned using Din-rail mountable terminal blocks to get power to each of the laser controller boxes.
I scoped out some power supplies for the interface box as well. Right now I am considering a 24VDC supply from Digikey prt no. Z2500-ND and two 15VDC supply from Digikey prt no. Z2475-ND.
I cleaned up the different temperature rejection ratio test I had conducted. I also partially re-setup the DC temperature sensitivity test for the 4000 class Measurement Specialties accels because I was not happy with the first test.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment